Calculators

Pond & Water Feature Volume Calculator

Work out how many gallons your pond or water feature holds - the number you need for choosing a pump, filter, liner treatments and fish stocking.

How many gallons will it hold?

Enter the length and width in feet and the average depth in inches, then press Calculate.

Results are estimates for planning, and any prices are rough US ranges. Bag sizes, material weights and prices vary by supplier and region - confirm the final quantity before you order.

Good to know

Sizing a pond or water feature

A few things worth knowing before you dig, line and fill.

Gallons set the pump

Choose a pump that moves the whole volume at least once an hour (in GPH) at your waterfall height - more often for koi.

Round and oval ponds

Measure the longest length and widest width as a rectangle, then take about 80% for a close estimate.

Water is heavy

Each gallon weighs about 8⅓ lb - a 700-gallon pond holds nearly 3 tons. Never set a large feature on a deck without checking its load rating.

For your pond or water feature

Our picks

As an Amazon Associate, PlantMapper may earn from qualifying purchases. Prices and availability are set by Amazon.

← All garden calculators

Common questions

How do I calculate how many gallons my pond holds?

Multiply length × width × average depth, all in feet, to get cubic feet, then multiply by 7.48 to get gallons. A pond 8 ft long, 6 ft wide and 2 ft deep on average holds 96 cubic feet, or about 718 gallons. For a round or kidney-shaped pond, work it out as a rectangle and take about 80%.

What size pump do I need for my pond?

As a starting point, choose a pump that circulates the whole volume at least once an hour, so a 700-gallon pond needs at least 700 gallons per hour (GPH). Flow drops as water is pushed up to a waterfall or fountain, so check the pump’s chart at your head height. Koi ponds are often turned over every 1-2 hours with strong filtration.

How deep should a backyard pond be?

A wildlife or plant pond can be 18-24 inches deep in the middle with shallow, sloping edges and 8-12 inch shelves for marginal plants. Fish ponds should be at least 2 feet deep in mild areas and 3 feet or more where winters are cold, so fish can overwinter below the ice. Many towns treat ponds deeper than 18-24 inches like pools, so check fencing rules.

How do I find the average depth of an uneven pond?

Take depth readings in inches at several points - on the shelves, the slopes and the deepest part - add them up and divide by the number of readings. Use that average in the calculator. Ponds with lots of shelves or sloping sides hold noticeably less than a straight-sided box of the same length and width.

More in Calculators

See everything in Calculators →