Pick the calculator that matches the job
Every calculator is free, runs in your browser and needs no sign-up. If you are not sure which one you need, the rule of thumb is simple: figure by volume (cubic yards) for anything loose - gravel, topsoil, compost, mulch - and by area (square feet) for anything laid on a surface - sod, pavers, deck boards.
I am ordering gravel or stone
The most common over-order in landscaping. Get cubic yards, tons and bags at a depth that actually stays put.
Open the calculatorI am filling a raised bed
A 4 × 8 bed swallows far more soil than people expect. Get the cubic feet before the delivery, not after.
Open the calculatorI am building a paver patio
Square footage, paver counts, gravel base and sand - with an allowance for cuts.
Open the calculatorI am laying a lawn
Square feet, sod pieces and pallets for the area, with the usual allowance for curves and edges.
Open the calculatorI am costing a project
A plant count and a ballpark dollar budget for a new flower bed before you commit to anything.
Open the calculatorI want to know what to plant now
What to start, sow and plant this month in your USDA zone, timed from your frost dates.
Open the calculatorAll 13 garden calculators
Bookmark the ones you use. Each starts with sensible default depths and sizes, so you can sanity-check a landscaper’s quote as well as place an order.
The Calculators section by numbers
Only figures that can be counted from the tools themselves. Nothing here is an estimate of usage or accuracy.
13
garden calculators
Free, in the browser, with no sign-up and nothing to install.
12
work in feet and inches
Results in square feet, cubic feet, cubic yards, tons and gallons - the units suppliers quote in.
9
USDA zones covered
The monthly planting calculator times jobs from frost dates in zones 3 through 11.
- Free to use
- No sign-up
- US units
- Works offline once loaded
- Mobile friendly
Measuring properly is the cheapest part of any project
Over-ordering is the normal outcome
Loose materials are sold by the ton, the cubic yard or the bag and used by the inch, and the two don’t translate in your head. It is easy to order far too much gravel and far too little soil. A minute with the gravel calculator or the raised bed soil calculator settles it.
Depth is the number people get wrong
Gravel spread under an inch deep never knits together and shows the landscape fabric; mulch thinner than 2 inches does little for weeds or moisture. The calculators default to depths that actually work, so the quantity you get is for a finish that lasts.
Waste has a cost at both ends
A leftover pile of stone has to be stored, moved or hauled away, and a short load means paying a second delivery fee. Getting within ten percent the first time is worth more than any coupon.
It makes quotes checkable
When a landscaper’s quote lists twelve tons of base gravel for a patio, it helps to know whether that is in the ballpark. These are the same sums a contractor does - run them yourself before you sign anything.
Spacing decides how a bed looks in year three
Planted too far apart a bed never fills in; too close and everything is competing by the second summer. The spacing calculator turns a spacing recommendation into an actual plant count.
Measure, calculate, check, buy
Four steps, and the whole thing takes about ten minutes for a typical garden project.
-
Step 1
Measure the area properly
Measure in feet, in two directions, and take the longest and widest points. Break an awkward shape into rectangles and add them together - that is far more reliable than trying to be clever with a curve. Write the numbers down rather than carrying them in your head.
Area calculator → -
Step 2
Choose the depth, not just the area
Loose materials are ordered by volume, so the depth in inches matters as much as the square footage. Use the depth the calculator suggests unless you have a reason not to - too thin is the commonest reason a finish fails.
Gravel calculator → -
Step 3
Add a sensible allowance
Around 5-10% for cutting and shaping on sod and pavers, and roughly 25% over the finished volume for a gravel base, because it compacts as you run the plate compactor over it. The calculators tell you where an allowance applies.
Sod calculator → -
Step 4
Check the quote against the sum
Compare your figure with the supplier or contractor total. If they differ by more than about a fifth, something is different - usually the depth, or a gravel base nobody mentioned.
Flower bed cost calculator → -
Step 5
Order, and order once
Bulk by the cubic yard is cheaper than bags for anything bigger than a small bed, and one delivery is cheaper than two. Knowing the number before you call the supply yard is the whole point.
Back to all calculators →
Measuring and quantities: common questions
How do I measure an irregular yard or bed?
Break it into rectangles. Measure each one in feet, work out its square footage, and add them together - far more accurate than averaging a curve. For a genuinely curved bed, take the longest length and the widest width, treat it as a rectangle and subtract roughly a fifth. Measure in two directions and write the numbers down.
Which calculators should I use for a new flower bed?
Usually three. The topsoil calculator for any soil you are bringing in, the plant spacing calculator to turn a spacing into a plant count, and the flower bed cost calculator for a budget. If you are mulching afterward, add the mulch calculator.
How much extra should I order?
It depends on the material. Around 5-10% extra on sod and pavers covers cutting and shaping. A compacted gravel base needs roughly 25% more than the finished volume because it consolidates. Mulch and decorative gravel need very little extra - over-ordering loose material is the most common waste in yard projects. Each calculator says where an allowance is built in.
How do I convert square feet to cubic yards?
Multiply the area in square feet by the depth in inches, divide by 12 to get cubic feet, then divide by 27 to get cubic yards. For example, 100 square feet at 3 inches deep is 25 cubic feet, or 0.93 cubic yards. The calculators do this for you and also give bag counts.
Why does my raised bed need so much soil?
Because volume climbs quickly with depth. A 4 × 8 ft bed 12 inches deep holds 32 cubic feet - about 1.2 cubic yards and well over a ton of damp soil, which is more than many pickup trucks should carry. The raised bed soil calculator works from inside dimensions, and our raised planters guide covers what to fill it with.
Are the results a substitute for a supplier quote?
No - they are a check on one. Suppliers sell differently (bag sizes, pallet sizes and stone weights are not standard), prices vary widely by region, and site conditions change what you need. Use the figures to see whether a quote is in the right ballpark and to avoid ordering blind.
Do I need to sign up or install anything?
No. Every calculator runs in the page, free, with no account and no data leaving your browser. They keep working on a phone out in the yard with a weak signal once the page has loaded.
Measure once, order once
If you are starting a project, work through the area first and the materials second. The patio paver calculator is the place to begin for anything paved, the topsoil calculator for anything planted, and the gravel calculator for anything loose. Every guide on PlantMapper links to the calculator it needs at the point it comes up.