The guides, in the order the decisions come up
Start with planning. Height, width and placement are the decisions people most often get wrong, and they are the ones you cannot change once the box is full of soil. More guides are added as the section grows.
Planning a Raised Planter
What planters do well, how they differ from raised beds and containers, choosing a spot, and the three measurements that decide everything: height from how you want to work, width from your reach, depth from what you grow. Plus accessibility, path widths and rough US costs.
Get the dimensions rightChoosing Materials
Cedar, redwood, pressure-treated lumber, landscape timbers, galvanized and Corten steel, composite, concrete block, brick, stone and gabions, compared on cost, lifespan and how hard they are to build, with a straight answer on what is safe for growing food.
Cedar to concrete block, comparedBuilding a Raised Planter
Preparing a firm base on soil, a patio or a slope, construction and hardware that will not fail, why you line the walls but never the bottom, drainage that works, and the soil mix to fill it with.
Base, frame, liner, fillPlanting & Care
Vegetables and herbs by soil depth, ornamental plantings for structure and season, spacing and succession planting by zone, the watering habit that matters most, feeding a closed box, and eight problems diagnosed.
What to grow, and keeping it goingFour things that decide whether a planter works
Almost every raised planter that disappoints does so for one of these four reasons.
The measurements matter more than the material
Height comes from how you want to work: about 24 in to sit on the edge, 30 to 36 in to stand at. Width comes from your reach: about 4 ft if you can get to both sides, 2 ft against a wall or fence. Height, width and depth.
Never seal the bottom
Line the walls to protect the wood, but a plastic sheet across the bottom turns a planter into a bucket. It is the most common reason a planter stays waterlogged, and you cannot see it once it is full. Lining it properly.
Don't fill it with straight potting mix
It looks perfect on day one, settles by up to half within a year and runs out of nutrients by midsummer. Use roughly 60% screened topsoil, 30% compost and 10% coarse sand or fine bark, mixed together. What to fill it with.
Water deeply, feed regularly
A planter dries out faster than in-ground beds and its nutrients run out. A long soak two or three times a week (more in a Southwest or Texas summer) beats a daily sprinkle, and an annual layer of compost is the most valuable job of the year. Watering and feeding.
A raised planter, in the order it gets built
Six stages. The first two deserve the most time, because everything after them is locked in by what you decide.
-
Step 1
Decide what it is for, and where it goes
Growing food comfortably, getting good soil onto a patio or bad ground, structure in a landscape design, or gardening without kneeling. Then put it in full sun, within reach of a hose spigot, somewhere you walk past every day, and at least a few inches clear of the house siding.
Choosing a position → -
Step 2
Settle the height, width and depth
Height from how you want to work, width from your comfortable reach, soil depth from what you plan to grow. Mock up the height with a few cinder blocks and pretend to weed it before you commit. It is a five-minute test that prevents a permanent mistake.
The three dimensions → -
Step 3
Choose the material and price the soil
Cedar or ground-contact pressure-treated lumber is the sensible default; galvanized steel kits suit modern yards and curves. Price the soil at the same time, because on a big planter the mix often costs more than the box.
Materials compared → -
Step 4
Prepare a firm, level base
Call 811 before digging. Level a firm strip under each wall by cutting down rather than filling, check the diagonals match, and loosen the soil inside. On a patio, raise the planter on feet so the bottom boards never sit in water.
Preparing the base → -
Step 5
Build it, line the walls and fill it
Corner posts inside, boards screwed on from outside with exterior-rated screws, a middle post every 3 to 4 ft, a cross-brace on anything wide. Line the walls only, never the bottom, and fill in layers with topsoil, compost and coarse sand.
Construction → -
Step 6
Plant it, water deeply, top up with compost every spring
Plant about 6 in in from the edge where the soil stays moister, match crops to the depth you built, soak deeply two or three times a week, and spread 2 in of compost on top each spring. That is the whole routine.
Planting and care →
Work out what it will take
The soil is the cost people underestimate. Work out the cubic feet before you order anything.
Raised planters: the questions everyone asks first
Quick answers to the common questions. Each guide has a fuller set of its own.
What is the difference between a raised planter and a raised bed?
A raised bed is a low frame sitting directly on the ground with an open bottom, so roots grow down into the soil below. A raised planter is a taller, permanent box with a closed or partly closed bottom, filled entirely with soil you bring in, so it can stand on a patio, a concrete slab or a rooftop deck. Planters are typically 18 to 36 in tall against 6 to 18 in for a bed, cost more to fill and need more watering, but they go where a raised bed cannot and can be built to a comfortable working height.
How high should a raised planter be?
It depends on how you want to work at it, and this is the decision people most often get wrong. 18 to 24 in is the popular choice and suits kneeling or sitting on the edge. 24 to 30 in lets you perch and work with only a slight bend, and is the usual answer if a bad back is the reason for building. 30 to 36 in allows full standing use with no bending, and about 30 in to the top of the soil, with knee space below, is the usual range for wheelchair users.
What is the best material for a raised planter?
For most people, cedar or ground-contact pressure-treated lumber, in 2x boards (1½ in thick): easy to build, reasonably priced and good for many years. Western red cedar and redwood resist rot and insects naturally; modern treated lumber uses copper-based preservatives. Choose differently for a reason: galvanized or Corten steel for modern shapes and curves, concrete block, brick or stone to match the house and last for decades, and composite or aluminum where weight or maintenance matters. All the materials compared.
How deep does a raised planter need to be?
About 12 to 18 in of soil handles almost everything most people grow: carrots, potatoes, broccoli, zucchini, tomatoes, beans and salad greens. Lettuce, radishes and herbs manage in 6 to 8 in; parsnips, asparagus, roses and small shrubs want 18 in or more. Soil depth and planter height are different things: a tall planter can have a bulky filler layer at the bottom, which saves a lot on soil.
What should I fill a raised planter with?
Roughly 60% screened topsoil, 30% compost or aged manure and 10% coarse sand or fine pine bark, mixed rather than layered. Landscape supply yards sell this as "raised bed mix" or "garden blend", and above about a cubic yard bulk delivery is usually far cheaper than bags. Do not fill a planter with straight bagged potting mix: it settles by up to half in the first year and holds very little nutrition past midsummer.
Do raised planters need drainage holes?
On open ground, no: water drains out the bottom, so just loosen the soil before filling and lay nothing waterproof. On a patio, concrete or a closed bottom, yes: leave about ¼ to ⅜ in gaps between the lowest boards or drill ¾ in holes about every 12 in, add 3 to 4 in of clean gravel with landscape fabric on top, and raise the planter on feet. Above all, never seal the bottom with plastic sheeting, the most common cause of a permanently waterlogged planter.
Is pressure-treated lumber safe for vegetable planters?
Modern pressure-treated lumber sold for home use (ACQ or copper azole) is widely considered acceptable for food gardens; the arsenic-based CCA treatment was phased out for residential use at the end of 2003. If you would rather not use it, choose cedar, redwood or galvanized steel, or line the inside walls with a permeable fabric. The real exception is creosote: never use old creosote-treated railroad ties for food gardens or play areas, and be wary of old reclaimed lumber of unknown history.
How much does a raised planter cost?
Very roughly, and it varies a lot by region: the box itself runs about $3 to $8 per linear foot of wall in treated lumber, more in cedar or redwood, $10 to $30 or more for galvanized or Corten steel, and $20 to $50 or more for block, brick or stone built in place. Then add the soil, which people routinely underestimate: an 8 x 4 ft planter filled 2 ft deep needs about 64 cubic feet (about 2.4 cubic yards), commonly $150 to $350 delivered in bulk. On a big planter the soil often costs more than the lumber.
Planning one, choosing materials, or filling one you have built?
If you have not started, the planning guide is the one to read: height, width and placement are permanent decisions and the easiest to get wrong. If the design is settled, the materials guide tells you what each option costs and how long it lasts. And if the box is built and you are standing there with a wheelbarrow, go to the fill section: the right mix is roughly 60% topsoil, 30% compost and 10% coarse sand, not the bag of potting mix you were about to open.