PlantMapper · Landscaping

Landscape Lighting

The best backyard lighting is rarely the brightest. A few well-placed lights on a path, the deck steps and one good tree, with everything else left in shadow, make a yard look better at night than it does at noon. This section walks through planning a scheme, choosing between 12V low-voltage, 120V line voltage and solar, installing it safely off a GFCI outlet, and the timers and upkeep that keep it glowing for years. Free to read, no sign-up.

Plan · buy · install12V, 120V and solarNo sign-up

Electrical safety first. These guides give general advice, not wiring instructions for household current. Anything at 120 volts - a new outdoor outlet, a new circuit, hardwired wall or post lights, buried line-voltage cable - should be installed by a licensed electrician, and in most places it needs a permit and an inspection under your local electrical code. Outdoor outlets need GFCI protection and a weatherproof in-use cover, and every fixture should be listed for the wet or damp location it sits in. Pools, spas, ponds and fountains have extra code requirements and are never a place to improvise. A 12V low-voltage system plugged into a properly installed GFCI outlet is generally a reasonable DIY job. Before you dig any trench, call 811 so buried utility lines can be marked.

Where would you like to start

Four guides, in the order the decisions come up

Start with planning. What you choose to light, and what you leave dark on purpose, matters much more than the brand of fixture. More guides are added as the section grows.

The principles

Four things that decide whether a scheme works

When landscape lighting disappoints, it is nearly always for one of these reasons.

Two lantern-style lights along a garden walkway at dusk
Light a few things well and let the dark do the rest

Fewer lights look better

A yard lit evenly from end to end looks flat, like a parking lot. Three or four features glowing out of the darkness look dramatic, use less power and keep the neighbors on your side. The three-layer approach.

See the glow, not the bulb

If you can see the bright source itself from the deck or the kitchen window, the scheme feels harsh however good the fixtures are, and the glare ruins your night vision for everything else. Avoiding glare.

Warm white, rated for wet locations

Stick to 2200 to 2700K everywhere. Buy fixtures listed for wet locations, with IP67 or better at ground level and IP68 for anything underwater. Those two specs decide how it looks and how long it lasts. Wet ratings explained.

120V is a licensed electrician’s job

New circuits, outlets, hardwired fixtures and anything near water belong to a licensed electrician, usually with a permit. A 12V system plugged into a GFCI outlet is yours to install. Who does what.

First job to last

A landscape lighting project, step by step

Six stages. The first one costs nothing and shapes everything after it.

  1. Step 1

    Walk the yard after dark with a flashlight

    Have someone point a strong flashlight at trees, walls and steps from different angles while you watch from the deck, the patio and the kitchen window. Thirty minutes of that beats any drawing, and it usually changes what you planned to light.

    The approach →
  2. Step 2

    Pick your three layers, and your dark areas

    Path and step lights for getting around safely, ambient light where you sit, and three or four accents worth showing off. Then decide what stays dark on purpose. That contrast is what gives a yard depth at night.

    Lighting each area →
  3. Step 3

    Get the power sorted first

    Have a licensed electrician add a GFCI-protected outdoor outlet with an in-use cover where the transformer will hang, plus any 120V wall lights or pool and pond work. That one job turns the rest into something you can do yourself.

    Who does what →
  4. Step 4

    Buy on the specs that matter

    Warm white at 2200 to 2700K, chosen by lumens and beam spread rather than watts, listed for wet locations, in solid brass, copper or stainless steel if you want them working in fifteen years. Cheap aluminum fixtures corrode fast, especially near the coast.

    Brightness and color →
  5. Step 5

    Lay it out loosely, then bury it

    Set the fixtures out on the surface and run them for an evening or two. Check every view, including from inside the house and from next door, and only then call 811, trench the cable a few inches down and set the stakes firmly.

    Installing low-voltage →
  6. Step 6

    Use an astronomical timer, and clean twice a year

    An astronomical timer knows your sunset time all year, so the lights come on at dusk without fiddling every season. Then switch off and wipe every lens in spring and fall, trimming back plants that have grown over fixtures. It is the most effective maintenance there is.

    Choosing controls →
Free PlantMapper tools

Plan the spaces the lighting is for

Most lighting is arranged around a patio, a walkway or a structure. These tools help with the spaces themselves.

Start here

Landscape lighting: the questions people ask first

Quick answers to the common questions. Each guide has a fuller set of its own.

Do I need an electrician for landscape lighting?

For anything at 120 volts, yes. A new outdoor outlet, a new circuit, hardwired wall or post lights, buried line-voltage cable and anything in or near a pool, pond or fountain should be installed by a licensed electrician, usually with a permit and inspection under your local code. Once you have a properly installed GFCI-protected outdoor outlet with a weatherproof in-use cover, a 12V low-voltage system plugged into it is something most homeowners install and extend themselves.

How do I plan a landscape lighting scheme?

Think in three layers. Path and step lighting so people can move safely, kept low, warm and pointed down. Ambient lighting where you sit, usually string lights overhead and shielded wall or deck lights below eye level. And accent lighting on three or four features really worth showing, a specimen tree, a stone wall, a fountain, planned from the window or deck you look out from most. Leave the rest dark, because the darkness is what makes the lit parts work. The full guide.

Should I use 12V low-voltage, 120V line voltage or solar?

Low-voltage 12V suits most backyards: safe for a homeowner to install, the cable only needs shallow burial, and you can move fixtures until it looks right. Line voltage at 120V is for hardwired wall and entry lights, very long runs, high-output security lights and fixtures set into hardscape, and it is a job for a licensed electrician. Solar needs no wiring at all and gives far less light, especially in winter and in shady yards, so it suits renters, temporary effects and spots with no power.

What rating do outdoor light fixtures need?

Look for fixtures listed by UL or ETL for wet locations for anything out in the open, and damp-location fixtures only under a covered porch or roof. Many landscape fixtures also carry an IP rating: IP65 is a sensible minimum in the open, IP67 for anything at ground level such as path, well and in-ground lights, and IP68 with a stated depth for anything submerged in a pond or fountain. A good fixture on a poor connection is still not protected, so use gel-filled, direct-burial connectors.

What color temperature should landscape lights be?

Warm white, around 2200 to 2700K, for nearly everything. It flatters foliage, brick and stone, feels relaxed rather than commercial, and scatters less blue light into the night sky, which is what the International Dark-Sky Association (DarkSky International) recommends. Cool white and daylight bulbs make a yard look like a parking lot. Keep the color temperature the same across the whole scheme, because mixed warm and cool fixtures are obvious after dark.

How do I keep my lighting from bothering the neighbors?

Aim, shield, time and dim, the same four things that make a scheme look better. Point lights down and in, never at a property line or a neighbor's window. Choose shielded, fully cut-off fixtures so the bulb itself is not visible from next door. Put everything on a timer or photocell so nothing burns all night. Keep output low and color warm. Some towns and HOAs have outdoor lighting rules, so check yours, then stand out on the sidewalk and look honestly.

Is a security floodlight a good idea?

A modest motion-activated light is genuinely useful; a floodlight burning all night is not. People stop noticing a constant light within a week, glare creates black shadows just outside the beam, and it annoys everyone nearby. Use a warm, shielded fixture of moderate output aimed at the actual approach, with a short time setting of a minute or two, on a separate control from the landscape lights so it does not trip while you are sitting outside.

How much does landscape lighting cost?

Very roughly, and it varies a lot by region: a DIY 12V kit with a transformer and six to eight fixtures runs about $150 to $500, with good individual brass fixtures at $60 to $250 each. Outdoor-rated string lights are $30 to $150. Having an electrician add a GFCI outdoor outlet is often $200 to $500, and a professionally designed and installed low-voltage system commonly runs into the low thousands. LED running costs are small, typically a few dollars a month for a whole backyard scheme.

Start where you are

Starting from scratch, choosing fixtures, or fixing lights that have dimmed?

If nothing is in yet, take a flashlight out after dark before you spend a dollar - it will change what you thought you wanted to light. If the plan is settled, the buying guide covers the two specs that really matter: warm white at 2200 to 2700K, and a wet rating that suits where each fixture actually sits. And if your lights have faded, clean the lenses and check the connections before you blame the transformer. Most of the time that brings them back.

Warm string lights glowing on a tree branch at night